Câmara Traseira Marcha-a-Trás BVS-549 + Monitor 7"" LCD TFT - BLOW

Ready to work in all conditions
The camera´s parameters ensure good fulfillment of its basic tasks, which is to transmit the image behind the vehicle, in particular, the image sensor´s wide viewing angle and the horizontal view must be emphasized. Equipped with infrared diodes, the camera will work at night. The device has an IP67 waterproof rating, ensuring continuous operation even in rainy conditions. The set has the necessary wires to mount the camera.
Secure parking and reversing
Reversing parking is often a challenge, especially in difficult terrain conditions, in the case of very limited visibility or a very small amount of space in the designated parking space. This task is even more difficult in the case of vans. The camera will provide each driver with an almost complete view of the space behind the vehicle, and the ability to adjust the camera vertically will allow you to adjust the viewing angle as needed.
The wide screen increases the comfort of use
The 7 inch screen makes the display very readable. Thanks to this, the driver can concentrate almost entirely on the rear of the vehicle, which in turn increases the comfort and safety of other passengers, but also of other road users.
Characteristics of the BLOW BVS-549 camera
Image sensor: CMOS7070
Resolution: 658x582
Measuring area: 4.9 x 3.7
Lens: F = 2.5mm / F = 2.0
Signal system: PAL
Horizontal sync (kHz): 15625/15734
V-Sync (Hz): 50/60
Automatic gain control and backlight control: Yes
Horizontal definition: 420 TV lines
Minimum illumination: 1.00 lux
Signal/Noise: < 48.0 [dB]
Image sensor viewing angle: 170°
Horizontal viewing angle: 120°
Vertical viewing angle: 90°
Diagonal viewing angle: 165°
Waterproof rating: IP67
Voltage range: DC 12-24V
Video output: 1.0Vp-p / 75O
Operating temperature: -20 ~+70°C, RH 95% max.
Storage temperature: -30 ~+80°C, RH 95% max.
Cable length on camera: 50cm
Power cable length: 90cm
Length of video cable to monitor: 580 cm
Characteristics of the TFT LCD Monitor
Power supply: 12V / 24V
Power Consumption: 4.5W
Resolution: 840x480
Video Format: PAL/NTSC
Matrix type: TFT
Screen size: 7´´ 16:9
Number of video inputs: 2
Contains
BVS-549 reversing camera
7"" TFT LCD monitor with 2 AV inputs
Wiring required to mount the camera
car holder
Remote control
base pad