Testador Continuidade Cabos Telefone/Rede UTP - UNI-T

Wire Tester UNI-T UT682 consists of transmitter and receiver. It has functions like telephone wire tracking, network wire tracking, cable wire tracking, network wire checking, etc. and features fast and accurate measurements. The UT682 is an ideal tool for personnel to install and maintain low current systems such as communication wires and integrated circuits.
FEATURES:
Product Name: Wire Tracker
Power supply: 9V battery (NOT included)
Signal transmission method: multi-frequency pulse
Short circuit test, open circuit: ?
Instructions for phone line polarity: ?
Audio signal test range: ?1000m
Video line distance: ?100m
Low battery indication (Transmitter): ?
Phone line tracking function
A. Connect the phone line head to the transmitters RJ11 interface;
B. Press the transmitters functional selection switch to the positina ""TEST"". The ""Status"" line tracking indicator gives signal, which indicates that the transmitter works correctly;
C. Hold down the ""Push to test"" button and look for the target cable with the receiver probe.
D. During testing, press the ""Switch"" button to switch between single and dual audio test pattern.
Network line tracking function
A : the network line with a crystal head on the transmitters RJ45 interface;
B. Press the transmitters functional selection switch to the ""TEST"" position, the ""Status"" line tracking indicator will flash, the which indicates that the transmitter works properly;
C. Hold down the ""Push to Test"" button and look for the target cable with the receiver probe.
D. During the test, press the ""Switch"" button to switch between single and dual audio test pattern.
Power cord line tracking function
(Power cord should not and be powered)
A. Connecting the transmitter with the metal cable using the crocodile claw adapter wires;
B. Set the transmitter functional selection switch to the ""TEST"" position , the ""Status"" line tracking indicator will flash, which indicates that the transmitter works correctly;
C. Hold down the ""Push to Test"" button and look for the target cable with the receiver probe.
D. During testing, press the ""Switch"" button to switch between single and dual audio test pattern.
ACCESSORIES:
1 UNI-T UT682 transmitter
1 x UNI-T UT682 receiver
1 x RJ11 adapter cable
1 x RJ45 adapter cable
1 x crocodile clip adapter cable
1 x woven bag
1 manual